Early fall is an important time for fertilizing home lawns. Fertilization is one of the primary lawn care practices. If done properly has a major positive impact on lawn appearance, but if done improperly can lead to lawn problems.
How do I fertilize my lawn?
First, select a quality fertilizer, then apply the right amount (rate) and apply at the right time of the season. Quality nitrogen fertilizers should contain controlled-release nitrogen. The amount or rate of nitrogen to apply is about one pound of actual nitrogen per 1,000 square feet of lawn area.
What is the best fertilizer to use?
There is no one perfect or absolute best fertilizer to purchase for your lawn, but there are many good ones available. Nitrogen is the most important nutrient; percent nitrogen is expressed as the first number in the series of three on the fertilizer bag. There are fast-release and controlled-release nitrogen sources. Key terms to look for include controlled-release, slow-release, slowly-available, or water-insoluble nitrogen. Some specific types that may be listed include ureaform, sulfur-coated urea, polymer-coated urea, and IBDU (isobutylidenediurea). Several organic nitrogen sources are controlled-release.
Most quality lawn fertilizers offer a balance of fast and controlled release sources to offer a fertilizer that will provide some quick color (without a big surge of growth) and some long-lasting nitrogen.
The higher the percent nitrogen, the less product is needed on the lawn to supply the one pound per 1,000 square feet rate suggested. In addition, if the material is controlled-release, the risk of burning the lawn is low even though the percentage nitrogen in the product may be high. Fast release nitrogen fertilizers, which may contain high levels of salt, can burn lawns.
Balanced fertilizers, such as a 10-10-10, have a N:P:K ratio of 1:1:1. The reason these are not suggested for repeated use on lawns is the amount of phosphorus applied, when supplying the one pound of nitrogen per 1,000 square feet, becomes quite high. Excess phosphorus may lead to potential runoff problems and more weeds in the lawn. Also, many of the all-purpose balanced fertilizers have only fast-release nitrogen as the nitrogen component, so the risk of burn may be higher.
Organic verses conventional fertilizers?
Whether a fertilizer is organic or synthetic, after applied to the lawn it must convert to a form the plant can use. Once converted, the plant does not know the difference as to the nitrogen source. One of the advantages associated with organic sources is low chance of burning grass. Some synthetic fast-release sources have high salt levels that increase the chances of burning. Most synthetic controlled-release sources are very unlikely to burn grass.
Many organic nitrogen sources contain less percentage of nitrogen is quite low, meaning it takes considerable material to be spread over the lawn to give the proper rate of nitrogen. Some materials, such as compost, are best used as a soil conditioner to improve soil quality, rather than to supply nutrients.
Some organic and some synthetic fertilizer sources rely on soil microbes to break them down to release nitrogen, so they do not work when soils are cold.
Are dry fertilizer products better than liquid?
There are both fast and controlled release nitrogen sources for liquid and dry (granular) application. So in some cases granular can be better, but in other cases, the liquid material may be better than a granular it is compared with.
How do I know how much fertilizer to apply?
Divide 100 by the percent nitrogen in the bag (first number expressed a whole number) to figure how much is needed per 1,000 square feet. For example, a fertilizer with 20 percent nitrogen would require 100/20 or 5 pounds of fertilizer product per every 1,000 square feet of lawn. Too much nitrogen fertilizer has damaged this lawn.
The next figure needed is the total area or square footage of the lawn. Take your total lot size and subtract everything not in lawn to determine this figure. An acre is 43,560 square feet, if you know your lot expressed in a portion of an acre. Then subtract the square footage of the house, driveway, gardens, patio, etc. The other way to figure is just to measure dimensions of the lawn areas and calculate as square feet.
Once you arrive at the square footage in lawn, divide this by 1,000. Then multiply by the pounds of fertilizer needed per 1,000 square feet figured above. This gives you the approximate pounds of fertilizer needed to spread on your lawn.
Using the previous example of a 20 percent nitrogen fertilizer, lets walk through this. Dividing 100 by 20 gives 5, meaning 5 pounds of fertilizer is needed to supply 1 pound of actual nitrogen for every 1,000 square feet. If the lawn measures out to 12,000 square feet, dividing 12,000 by 1000 gives 12. Now take 5 times 12, which equals 60. This means it would take 60 pounds of fertilizer, spread over the 12,000 square foot lawn, to supply a rate of 1 pound of actual nitrogen per 1,000 square feet.
Finally, most fertilizer bags give a spreader setting guide, which is usually calibrated to supply the 1 pound per 1,000 square feet rate, to help homeowners apply the right amount. The product label may tell you how much area the product will cover.
What about weed control and fertilizer products?
Weed and feed products are popular in that they provide fertilizer and weed control in one product. Early fall is a good time for controlling broadleaf weeds, such as dandelions, and fertilizing.
Another fertilizer and herbicide product is the fertilizer and crabgrass control products sold in spring. These contain fertilizer and a preemergence herbicide for crabgrass control.